add wishlist show wishlist Delete add compare show compare Delete preloader

HONDA 250 VTR MC33 #Reassembly Part 2

Posted by MOTOTRUST on

Now, we continue the reassembly with the shock absorber, the wiring harness and some elements such as the fuses and the CDI (ECU).

Fitting the shock absorber with a hint of grease on the upper fixing screw which is a rather peculiar BTR:

& lt;

The electrical harness:

Below, the small bridges (or nipples) for fixing the harness clips which are provided on the rear loop and the frame:

In the event that these bridges are broken, it suffices to take plastic serflexes, which is very easy and practical:

We now fix the harness on the second jumper of the rear loop and we arrange it correctly to accommodate the plastic tray which receives the battery, the fuse box, the starter relay and the CDI:

< / tr>
< img a style = "cursor: pointer" onclick = "window.open (this.src, 'Click here to enlarge photo', 'width = auto', 'height = auto', 'toolbar = no', 'scrollbars = no ',' resizable = yes', 'menuBar = no') "src =" https://cdn.shopify.com/s/files/1/0415/9550/2746/files/MOTOTRUST.net_-_HONDA_250_VTR_MC33.88 .jpg ">

the famous battery box from all angles:

< img a style = "cursor: pointer" onclick = "window.open (this.src, 'Click here to enlarge photo', 'width = auto', 'height = auto', 'toolbar = no', 'scrollbars = no ',' resizable = yes', 'menuBar = no') "src =" https://cdn.shopify.com/s/files/1/0415/9550/2746/files/MOTOTRUST.net_-_HONDA_250_VTR_MC33.103 .jpg ">

We can also already put the strap that is used to hold the battery just because it was close to hand !! And above all, we can install this famous plastic box for battery and CDI starting with the 'fit into the rear frame at the level of the red arrow. It is necessary to force a little.
Finally, it is fixed with the 2 side screws:

< / td>
< img a style = "cursor: pointer" onclick = "window.open (this.sr c, 'Click here to enlarge photo', 'width = auto', 'height = auto', 'toolbar = no', 'scrollbars = no', 'resizable = yes', 'menuBar = no') "src = "https://cdn.shopify.com/s/files/1/0415/9550/2746/files/MOTOTRUST.net_-_HONDA_250_VTR_MC33.110.jpg">


Share this post



← Older Post Newer Post →


Leave a comment

Please note, comments must be approved before they are published.